This project consisted of replacing a 223'-9"x 24' concrete beam bridge with a 735' x 44' steel girder bridge. The unique features of this project included long bridge spans; 168', 300', and 267'. The steel girders were small, long, slender members and steel erection required an extensive girder erection plan, including numerous falsework towers and multi-crane lifts.
Contract: $92.9 Million 1.7 Mile Bridge crosses Lake Dallas, Texas
Contract: $37.6 Million Jensen's 14th crossing of the Missouri River
Contract: $56,000,000 2,478' bridge with a span of 425'
Contract: $65,171,000 State Route 13 over the Cumberland River
Bridge Width: 77 ft. 11 in. Bridge Length: 1,686 ft 2 in. Project Cost: $49.99M
Contract: $14M 1,400 ft bridge over Hillebrandt Bayou
Contract: $43M Concrete Beam Bridge over Lake Texoma
Contract: $3,180,000 A connecting bridge over the Raccoon River
Contract: $878,697 Used a Value Engineering Proposal to change bridge design
Contract: $32.8M Jensen's 13th time crossing the Missouri River
The bridge is 2,670 feet long and is a 15 span structure with a maximum span of 450 feet over the navigation channel.
The $24M project was opened in the fall of 2008 ahead of schedule. The 1500 foot long bridge is a 6 span structure with a maximum span of 280 feet.
310' tied arch bridge
Contract: $14,537,501 Steel girder bridge replacement in Omaha, NE
Building a culvert for 2nd Ave
Contract: $85M 7-year project included 18 bridges
Contract: $61M 18 spans resulting in a total bridge length of 3,280 feet
Contract: $50,949,500 Crossing the Mississippi River
Contract: $20M Twin bridges spanning 1,630'
Contract: $82,860,000 Two extraordinary, large and complex cofferdams were built
Contract: $47.7M Deepest drill shafts in Louisiana at time of project
Contract: $11,431,000 Pedestrian Bridge connecting 15 miles of recreational trails
Contract: $14M Completed: December 2009